(2) Screw the leveling feet or wheels to the lower post in a clockwise direction(The upper-post has a black plastic end cap at one end the lower-post has a leveling feet attached).
(3) Snap the plastic clips onto the post groove, clips must be snapped together with the small tapered slide facing up.
(4) Please make sure that you have the shelf the correct way up. Hold the shelf on its side and slide the top of the four posts through the bottom of the shelf at its corners until there is a snug fit. After the four posts have been slid through the shelf corner holes, set the shelf upright.
(5) Snap the plastic clips at your next desired shelf height. Slide the shelf down from the top of the posts onto the clips.
(6) Screw Upper Poles(B) into lower poles by screw connectors which is already assembled on the upper poles.
(7) Then repeat step 5 for the rest shelves. It is recommended that the top shelf be lined up in the upper-post groove.
(8) Pushing firmly down on every shelf at corners by rubber mallet to ensure the shelf in a place over the plastic clips.
(9)Screw the leveling feet in or out at the bottom of posts to attain proper leveling.
